How you can Lay Block Paving


Do It Yourself tasks can be very rewarding– as well as much cheaper! If you’re block paving your patio area or driveway, there’s no reason to get someone else in; as long as you’ve got the moment and motivation to do it on your own it’s really pretty simple and also easy to find out. Simply ensure you have the ideal tools and you’re good to go!

Create A Block Paving Design

The primary step is to decide how you desire your block paving to look. If you’re changing old paving, just what really did not you like regarding it? What renovations could you make? You should consider the general shape, useful aspects (such as dimension) and pattern of the bricks. It’s likewise a good idea to think about just what colour bricks will most ideal go with your house– you don’t want anything to clash.

Make Way For Your Block Paving

Next off, you’re going to intend to prepare the location. Define an area and dig it out, ensuring to dig far enough down to ensure that your paving will be despite the surrounding surface area. For this, you must make use of plant equipment such as a miniature excavator or a JCB.

Create The Sub-base

Create a sub-base to develop the foundations of your block paving. Your sub-base ought to go to the very least 100mm thick, and it can be a smart idea to put it over a layer of weed-fabric, to stop weeds from expanding through your pavement. Finish your sub-base by going over it with a vibrating place. This will squash it down and level it.

Produce Sturdy Edge Restraints

Place edge restraints down to define the side of your paving. They should be firm and encouraging as the external location is the weakest part of the paving. They will certainly additionally work as a quick guide for the shape of your block paving.

Begin Screeding

Next, you’ll need to screed the location, adding to the foundations and making a level surface for the paving to rest on. Place about 50mm of slightly damp sharp sand down and make use of a shaking plate once again to smooth and set. After that take down a 2nd layer, all the same as the first.

Laying Your Block Paving

Lastly, you can begin putting down your bricks. For the very best surface, begin at the end of a slope and go up. The joints of the bricks must overlap– just like in a wall– so you’ll be left with voids that you’ll have to fill in with cuts of brick. Once your block paving is down and all the brick are appropriately positioned, sweep some kiln dried sand over the surface. This will fill up the gaps between the joints.

See, not too challenging! Block paving is in fact rather very easy, and could provide you exceptional outcomes if done right. Once you’ve finished, take your time to relax and also appreciate all your effort- you deserve it!